Description

Overview

The OPTIMASS 7010 is a high-end single straight tube Coriolis mass flowmeter. It is particularly suitable for demanding process and dosing applications involving gases and shear-sensitive or viscous liquids, slurries, very aggressive media or media with a low flow velocity. The Coriolis meter features an integrated Modbus converter. This makes it the ideal solution for applications where a DCS or a PLC is already in use and extensive communication options and control functions are not necessary. By way of its Modbus interface the flowmeter integrates easily into existing controller systems. There is no need for a conventional signal converter. Purchase costs can be saved.

The OPTIMASS 7010 is available in four sensor materials (titanium, stainless steel, Hastelloy^®, tantalum). Due to its sensor design, there is virtually no pressure loss and the flowmeter is self-draining and easy to clean, which makes it also the perfect choice for hygienic applications. The Coriolis device is also approved for use in hazardous areas. It is additionally available with an EtherNet/IP^TM Interface Box offering a full-featured web-interface for configuration, maintenance and diagnostics as well as smooth integration into major EtherNet/IP^TM host systems.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

Single straight tube design
No separate converter needed: Communication direct from meter
Integrated temperature measurement
Available in four sensor materials: titanium, stainless steel, Hastelloy^® C or tantalum
With sensor size DN80 / 3″ in titanium or Hastelloy^® it is the largest single straight tube meter on the market
Optional PED approved secondary pressure containment up to 100 barg / 1450 psig
Virtually no pressure loss, easy to drain and clean
Many options (heat tracing, purge port etc.)
Immunity to crosstalk: resistant to installation and process effects
Optional EtherNet/IP^TM web-interface for configuration, maintenance and diagnostics

Specifications

Depending on selected device configuration

General information

Product type	Flowmeter
Product family name	OPTIMASS
Product positioning	For advanced applications and process control
Measurement principle	Coriolis
Measured media	Liquids, Gases

Operating conditions

Process pressure	max. 100 barg/ 1450 psig
Process temperature	-40…+150°C/ -40…+302°F

Materials

Measuring tube	Austenitic alloy (2.4602/Alloy 22), Duplex stainless steel (1.4462/318), Titanium alloy (3.7195/Ti-Grade 9), Tantalum (UNS RO5255 / RO5200)

Process connections

Flange connections	EN (1092-1): DN10…100 ASME (B 16.5): ½…4″ JIS (B 2220): 10…100A
Hygienic connections	Clamp (DIN 32676): DN10, DN15, DN25, DN40, DN50, DN80 Clamp (ISO 2852): 25, 40, 51, 76.1 Tri-Clamp: ½”, ¾”, 1″, 1½”, 2″, 3″ Threaded ferrule (DIN 11851): DN10, DN15, DN25, DN40, DN50, DN80 Flange with groove (DIN 11864-2): DN10, DN15, DN25, DN40, DN50, DN80 Threaded ferrule (SMS 1146): 25 mm, 38 mm, 51 mm, 76 mm IDF/ISS: 10A, 15A, 1″, 1½”, 2″, 3

Approvals/Standards

Certificates/Approvals Ex	ATEX, IECEx, EAC Ex, INMETRO, FM
Certificates/Approvals Hygienic	FDA, 3A, EHEDG, EC 1935/2004
Certificates/Approvals Marine	ABS, BV, CCS, DNV, KR, LR, NK, RINA, CRS, IRS, PRS, RS